skip to Main Content

UreGuard Pipe Supports

Other Products > UreGuard Pipe Supports

UreGuard Pipe Supports

 

The corrosion-related cost to the transmission pipeline industry is approximately $8.6 billion annually. One of the most common corrosion problems on a pipeline is where pipe supports interface with the pipe. Mark Tool & Rubber Co, Inc. working together with pipeline Corrosion Technicians have come up with the ultimate design for Pipeline Support Systems.
Polyurethane pipe supports

Ureguard Pipe Supports are made of hard durable castable polyurethane and can be adjusted to fit multiple sizes of pipe.The biggest advantage of our system is that it can be removed from the pipeline without picking the pipe line up for maintenance work.

get a pipeline support quote

Typical Physical Properties of UreGuard Pipe Supports

TENSILE STRENGTH, PSI ASTM D412 6498
ELONGATION, % ASTM D412 324
100% MODULUS ASTM D412 2491
200% MODULUS ASTM D412 3685
300% MODULUS ASTM D412 3685
TEAR STRENGTH, PLI ASTM D624 659
HARDNESS, SHORE D ASTM D2240 60
FLEXIBILITY, 1/8” MANDREL ASTM D1737 PASS
FLASH POINT, ºF PENSKY-MARTIN >200
WATER ABSORPTION ASTM D-471 <1.2%
TEMPERATURE LIMITS -40 DEGREES F TO 350 DEGREES F
Different size pipe supports
Pipe Diameter Range Part No: Support SizePrice/Set
2” - 4” PPS2-6 2"OD X 6"LG $91.00
6” - 8” PPS3-6 3"OD X 6"LG $121.55
10” - 16” PPS4-6 4"OD X 6"LG $170.35
18" - 24” PPS5-6 5"OD X 6"LG $235.00
Ureguard pipe supports
Pipe supports example
Back To Top