Our System Can Even be Removed Without Picking The Pipeline Up for Maintenance Painting
The corrosion-related cost to the transmission pipeline industry is approximately $5.4 to $8.6 billion annually. One of the most common corrosion problems on a pipeline is where pipe supports interface with the pipe.
Mark Tool & Rubber Co, Inc. working together with pipe line Corrosion Technician has come up with the ultimate design for Pipeline Support System.
Our UreGuard Pipeline Supports are made of a durable castable polyurethane 90D durometer and can be adjusted to multiple sizes of pipe. The biggest advantage of our system is that it can be removed from the pipeline without picking the pipeline up for maintenance painting.
Typical Physical Properties of UreGuard Pipeline Supports
TENSILE STRENGTH, PSI | ASTM D412 | 6498 |
ELONGATION, % | ASTM D412 | 324 |
100% MODULUS | ASTM D412 | 2491 |
200% MODULUS | ASTM D412 | 3685 |
300% MODULUS | ASTM D412 | 3685 |
TEAR STRENGTH, PLI | ASTM D624 | 659 |
HARDNESS, SHORE D | ASTM D2240 | 60 |
FLEXIBILITY, 1/8” MANDREL | ASTM D1737 | PASS |
FLASH POINT, ºF | PENSKY-MARTIN | >200 |
WATER ABSORPTION | ASTM D-471 | <1.2% |
TEMPERATURE LIMITS | Cell | -40 DEGREES F TO 350 DEGREES F |
Pipe Diameter Range | Part No | Support Size | Price/Set |
|---|---|---|---|
2” - 4” | PPS2-6 | 2"OD X 6"LG | $91.00 |
6” - 8” | PPS3-6 | 3"OD X 6"LG | $121.55 |
10” - 16” | PPS4-6 | 4"OD X 6"LG | $170.35 |
18" - 24” | PPS5-6 | 5"OD X 6"LG | $235.00 |
